It is important to stir the mixture thoroughly near the sides and bottom of the container, to achieve uniform dispersion of the hardener. Mixing of the 2 components should take place for about 5 minutes, using a low revolution mixer (300 rpm). The whole quantity of component B is added into component A. and then thoroughly cleaned from dust.Ĭomponents A (resin) and B (hardener) are packed in two separate containers, having the correct predetermined mixing proportion by weight. The substrate must be dry, stable and free of anything which would hinder bonding, such as dust, loose particles, grease, rust or any kind of corrosion.ĭepending on the nature of the substrate, it should be prepaired by brushing, rubbing down, sand blasting, etc. Typical examples of use are the protection of silos, steel bridges, iron roofs, pipes, fences etc. It can even be used as a coating on its own if its reddish-brown or grey color is satisfactory. It is particularly resistant to diluted acids, alkalis, petroleum products, to some solvents, water, sea water etc. It is extremely hard and resistant to friction. The protection of metal surfaces made of iron or steel, from oxidization or corrosion.ĮPOXYCOAT-AC antirust epoxy primer is applied for active anti-corrosive and anti-rust protection of iron and steel surfaces that are to be coated with EPOXYCOAT or DUROFLOOR epoxy systems. EPOXYCOAT-AC Two-component anti-corrosive epoxy coating
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |